Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

change daylight savings time<-> standard time

Created by: tecnicotesi1 at: 9/24/2014 12:26 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/24/2014 12:26 PM	Rate (0)
tecnicotesi1 Posts: 2 Rating: (0)	Dear Expert and All People love Automation of Siemens. I have a s7-1200, 1214c, I used the blocks: RD_SYS_T WR_SYS_T for read and write the date and time of the plc in the properties of cpu "Time of day" I have set: Time zone = UTC+01: 00 Berlin, Bern... .... Daylight saving time = active Difference between standard and daylight saving time = 60 mins but the cpu does not change daylight savings time<-> standard time Can you help me? Best Regards Attachment properties of cpu.jpg (329 Downloads)
tecnicotesi1 Posts: 2 Rating: (0)	Last edited by: tecnicotesi1 at: 9/24/2014 12:30 PM
Suggestion To thank Quote Answer

9/24/2014 12:43 PM	Rate (0)
Dippus1971 Advanced Member Joined: 7/9/2007 Last visit: 9/14/2022 Posts: 2 Rating: (0)	The 'RD_LOC_T' block will display the time to your daylight settings. Regards.

Suggestion To thank Quote Answer

9/24/2014 2:11 PM	Rate (0)
tecnicotesi1 Posts: 2 Rating: (0)	Dippus1971 The 'RD_LOC_T' block will display the time to your daylight settings. Regards. thank you very much
tecnicotesi1 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/27/2015 3:19 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4785 Rating: (123)	New question published by AutoGen_1052213 is split to a separate thread with the subject Block RD_SYS_T updating. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on