Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Change default grpahics for HW representation on Maintenance Station WinCC App

Created by: Zein at: 2/13/2013 3:46 PM (2 Replies)

Rating (0)

Thanks 2

3 Entries

2/13/2013 3:46 PM	Rate (0)
Zein Bronze Member Joined: 5/27/2009 Last visit: 11/28/2024 Posts: 122 Rating: (8)	Hi guys, this days i have been testing Maintenance Station 2009 using the example project. But i see the graphics used to represent the IO Cards and all HW components in WinCC in general are not very nice. In my case i need to use another images for the HW components, do you know if it is possible to use your own graphic lybrary to substitute the defauts representation of HW Componets in Maintenance Station WinCC Aplication and how to do it?? Thanks.

Suggestion To thank Quote Answer

2/14/2013 12:16 AM	Rate (0)
Zein Bronze Member Joined: 5/27/2009 Last visit: 11/28/2024 Posts: 122 Rating: (8)	I found a explanation for my question here /tf/WW/en/Posts/58709

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users umencho O_Moderator

2/14/2013 4:47 PM	Rate (0)
Silent Bob Posts: 836 Rating: (100)	You just helped yourself.. thats cool ;-) But have in mind that changing block icons or template pictures you have to consider that the OS projecteditor is copying the original pictures from the installation path to your project path each time you run it. So make sure the your changed are not getting lsot when you run the OS Project Editor.
Silent Bob Posts: 836 Rating: (100)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on