Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

change ip

Created by: yasin10112 at: 9/3/2015 9:22 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

9/3/2015 9:22 AM	Rate (0)
yasin10112 Posts: 23 Rating: (0)	Hi dear. how can change the ip in logo v8 ?
yasin10112 Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

9/3/2015 9:29 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/4/2023 Posts: 31545 Rating: (3920)	The easiest way is on the logo itself. Main Menu > Network > IP address [OK]
	Last edited by: ixo65 at: 9/3/2015 9:29:59 AM
Suggestion To thank Quote Answer

9/3/2015 10:51 AM	Rate (0)
yasin10112 Posts: 23 Rating: (0)	thanks
yasin10112 Posts: 23 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

9/3/2015 1:56 PM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, from LSC you can also do it: Tool/Ethernet..... Here you can also configure it. If you download the program and the configured IP (in the prog.) is different then the ip of your LOGO! you will be ask if you want to change. Hope this helps
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on