Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Change mode from 6 to 2

Created by: Tincek1 at: 11/30/2023 12:12 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/30/2023 12:12 PM	Rate (0)
Tincek1 Regular Member Joined: 1/4/2019 Last visit: 10/16/2024 Posts: 26 Rating: (0)	I have S7-214. I use the telegram 111. When the "Fixed stop reached" status has been detected I want to send to motor on the new position with mode 2. I have the problem with switching the mode from 6 to mode 2. How to change the mode without changing the Enable signal?

Suggestion To thank Quote Answer

12/1/2023 8:16 AM	Rate (0)
Transponder Snail Member Joined: 6/27/2017 Last visit: 6/26/2024 Posts: 158 Rating: (21)	Hello, please post the order number of your plc, sinamics, motor to receive a proper answer.

Suggestion To thank Quote Answer

12/1/2023 1:00 PM	Rate (0)
Tincek1 Regular Member Joined: 1/4/2019 Last visit: 10/16/2024 Posts: 26 Rating: (0)	Servo controler: 6SL3210-5FB10-4UF1 Motor: 1FL6034-2AF2x-xLA\Gx CPU: 6ES7 214-1AG40-0XB0

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on