Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

change outputs by triggering 1 inputs

Created by: VB#1 at: 11/22/2013 7:11 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/22/2013 7:11 PM	Rate (0)
VB#1 Posts: 2 Rating: (0)	I want to switch outputs activation by pulsing one inputs! like if i pulse input 1,output 1 will activate and then if i pulse it again will switch to output 2 and etc... and then going down by pulsing input 2! is that possible?
VB#1 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

11/22/2013 11:27 PM	Rate (0)
Toeternietoe Platinum Member Joined: 12/27/2006 Last visit: 11/27/2023 Posts: 1192 Rating: (112)	Yes thats possible with the LOGO! Use counters, as many as outputs you want. Counter 1 settings on 1, and switches Outupt 1 Counter 2 settings on 2, and switches output 2 and so on

Suggestion To thank Quote Answer

11/25/2013 11:26 PM	Rate (0)
VB#1 Posts: 2 Rating: (0)	but it cant counter and countdown in one? i think i can only reset it to zero?so i will need to put 1 counter and 1 countdown on each outputs! and the counter will be activate by inputs 1 and then countdown by inputs 2 and then put an overcounter and countdown that will activate the reset on each to not overpassed the counting! True or its not the easiest way?
VB#1 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

11/26/2013 10:43 AM	Rate (0)
cdrshort Bronze Member Joined: 9/6/2008 Last visit: 12/8/2023 Posts: 134 Rating: (16)	try the folowing example it will help you propably Attachment 1in pulse change over.zip (55 Downloads)
	http://electrotech-techblogg.blogspot.gr/
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on