Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CHANGE P 2576 VALUE IN S110 FROM PLC

Created by: vipz at: 3/25/2013 12:00 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/25/2013 12:00 PM	Rate (0)
vipz Gold Member Joined: 9/2/2012 Last visit: 8/15/2024 Posts: 711 Rating: (30)	Dear all, we need urgent help to overcome this condition. I dont have much idea in drive configuration. system config - sinamics s110, 315-2dp (communication via profibus dp ) In our application, we are using absolute positioning with active modulo correction. It is working well with 1 kind of product. But if changes the job(product type) , i may need to change the value in P 2576 (modulo range) again using laptop and drive software. so i want to know that, is there is any way to change P 2576 value from plc ?? thanks in advance Vipz
	With Best Regards VIPZ
Suggestion To thank Quote Answer

3/26/2013 8:58 PM	Rate (0)
zako_ Gold Member Joined: 5/22/2012 Last visit: 3/24/2022 Posts: 895 Rating: (67)	My recommendation is the Toolbox: http://support.automation.siemens.com/WW/view/en/25166781 Other possibilties : http://support.automation.siemens.com/WW/view/de/60733299

Suggestion To thank Quote Answer

3/29/2013 2:18 PM	Rate (0)
vipz Gold Member Joined: 9/2/2012 Last visit: 8/15/2024 Posts: 711 Rating: (30)	Dear zako, thanking you for the reply, i have seen the tool box, but to be frank i couldnt understatnd . is all the drive parameters are editable from plc? do u have any such simple project ( plc and sinamics - with parameter value change from plc ). Does any other members have the same?? please send to me for my reference. i just want to change single parameter value from plc regards VIPZ
	With Best Regards VIPZ
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on