Is it possible to change the old project Simotion controller with new controller. I did long back and it was replaced. (Hw config ..> select controller ..>Replace ).

Now the option is non editable. 

I did with Exporting method and converted to new. but its long procedure need to correct so many errors i.e axis interconnection,encoder and Package etc.

any suggestions for change/ replace controller.

ChristophD

Hello,

yes this should be possible.

About which controller do we Talk? Which SIMOTION Version.

To which ycontroller you will change?

Any screen available?

Regards

Christoph

 Hello I want to convert D425 V.4.2 to D445-2 V4.4

jacek d

You should right-click in the area marked in red.

 when i do the right click the option is not showing to replace. it is not accesible

Hello Christoph,

please find attached screen

ChristophD

not on the PLC Entry in the Rack, on the Rack you must click

"(0) SIMOTION D425" not "D425"!

 Well, and people say that one picture is worth 1000 words...

ChristophD

Hello,

not on the PLC Entry in the Rack, on the Rack you must click

"(0) SIMOTION D425" not "D425"!

Regards

Christoph

 Oh Great,

Thank you so much, it was my mistake.