Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Changing module parameters

Created by: ilyakut at: 8/14/2017 10:27 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

8/14/2017 10:27 AM	Rate (0)
ilyakut Posts: 7 Rating: (0)	Hello! I have ET200SP station and some module, in particular DI 16x24VDC ST. Is there any instruction to change its parameters? I need to change Input Delays from 20 ms to 0.05 ms (for example) can I somehow change it from a program? The same question for Energy Meters.
ilyakut Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

8/14/2017 10:41 AM	Rate (1)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 6/5/2023 Posts: 4179 Rating: (644)	Here.
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

8/14/2017 10:48 AM	Rate (0)
ilyakut Posts: 7 Rating: (0)	jacek d Here. Thanks!
ilyakut Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on