Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Changing report layout for printjob in runtime

Created by: Fran at: 11/15/2006 6:19 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/15/2006 6:19 PM	Rate (0)
Fran Posts: 26 Rating: (1)	Hi all WinCC users! An easy question. I thinki saw a previous thread or FAQtalking about it but i´m not sure.I have searched it in the FAQs and threads but i couldn't find it. So, let's go. Can i set a different layout and/or printjob for the "message list" than the "long-term archive" or "short term archive" window type of an Alarm Control?. I think it isn't possible but i´m not sure. If not, can i change in runtime the layout set to a printjob?. TIA! Bye!
Fran Posts: 26 Rating: (1)
Suggestion To thank Quote Answer

11/17/2006 1:57 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, ReportDesigner seems to be a little bit limited for your issues.... perhaps this FAQ can answer some of your questions: http://support.automation.siemens.com/WW/view/en/23397739 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

11/20/2006 9:37 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (149)	One other way to do this is to create your own print buttons. To do this simply create your own toolbar. You can do this very easily using the Standard C functions. So selecting a different view (message list, short-term, long-term) will change the report job printed in the print button. I haven't tried this but it might work [;)] Salma We dance in a circle and suppose,while the secret sits in the middle and knows

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on