Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Changing screens from a menu (V13, SP1, Upd 7, Comfort)

Created by: AndreasC at: 4/6/2016 10:46 AM (4 Replies)

Rating (1)

Thanks 3

5 Entries

4/6/2016 10:46 AM	Rate (0)
AndreasC Posts: 14 Rating: (0)	Hi! I want to be able to change between different screens in my project from a menu. I managed to just drag down a part of my first screen to make a place to put my buttons for changing screens i.e. a "menu". But I want this "menu"/"frame" or so called "Overview" to be on the left hand side. I am unable to drag the screen from the left. How can I make this "overview" go on the left hand side instead? //Andreas Attachment Picture2.jpg (221 Downloads)
AndreasC Posts: 14 Rating: (0)	Last edited by: AndreasC at: 4/6/2016 10:46:43 AM Last edited by: AndreasC at: 4/6/2016 10:49:59 AM
Suggestion To thank Quote Answer

4/6/2016 11:14 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	First, you have to read "First steps with TIA Portal".
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer

4/6/2016 11:16 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/29/2024 Posts: 14294 Rating: (1782)	Hello Andreas C The Overview Area is only usable on the Top Of the Screen. If you want to use the Left Side you have to use other functionalities like: - Templates: create a Template an use the Template in the Screens in which you want to see the Menue - Slide In Screens: create a Slide In screen for the left side and you can show the Menue on demand (works only in Images V13Sp1 or newer) Hope this helps a little bit Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Kahl AndreasC

4/6/2016 11:21 AM	Rate (1)
Kahl Platinum Member Joined: 12/16/2012 Last visit: 11/26/2024 Posts: 654 Rating: (130)	Hi! .... and some examples w/ a library: simatic-hmi-control-panels-innovative-design-and-operatio
	ALPHR Technology Europe
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AndreasC

4/6/2016 3:23 PM	Rate (0)
AndreasC Posts: 14 Rating: (0)	Thank you for your help guys! The link with the template libraries really helped!
AndreasC Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on