Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Clock

Created by: Electro Master at: 4/4/2013 12:09 PM (3 Replies)

Rating (2)

Thanks 0

4 Entries

4/4/2013 12:09 PM	Rate (0)
Electro Master Posts: 24 Rating: (0)	I have s7-1200 and TP-1500 with digital output, complete system for lighting control. The question is: I need to show the time and date on the HMI, I can do that but it’s appearing incorrectly, how can I modify it? note: I am using TIA v11
Electro Master Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

4/4/2013 1:18 PM	Rate (1)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 1/24/2025 Posts: 1523 Rating: (230)	electro master I have s7-1200 and TP-1500 with digital output, complete system for lighting control. The question is: I need to show the time and date on the HMI, I can do that but it’s appearing incorrectly, how can I modify it? note: I am using TIA v11 Hello electro master, Have a look at this instruction of S7-1200 to settheRTC of the CPU - WR_SYS_T
	Like it? Rate it!
Suggestion To thank Quote Answer

4/5/2013 1:02 PM	Rate (1)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 1/24/2025 Posts: 1523 Rating: (230)	Also have a look at this sample project In STEP 7 (TIA Portal) V11, how can you input, read out and edit the date and time for S7-300/400/1200?
	Like it? Rate it!
Suggestion To thank Quote Answer

3/2/2015 7:31 AM	Rate (0)
Electro Master Posts: 24 Rating: (0)	Thank you, its clear
Electro Master Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on