Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Code for animating an object

Created by: Priyanka V at: 12/30/2012 11:26 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/30/2012 11:26 AM	Rate (0)
Priyanka V Posts: 21 Rating: (0)	Hi, In SimaticWinCCI want to move an arrow three postion in forward direction and it should then return back to its original position and this cycle ,continues till the input is high. . .how to code n VBS.
Priyanka V Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

12/31/2012 10:07 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 12/10/2024 Posts: 2957 Rating: (243)	Hi, Start from learning VBS firstWhich VBS information and VBS programming aids are there in WinCC (TIA Portal)? Then find out what properties of object you can alter with VBS script in order to move it and basically it's done. Simple. If you don't want to learn then wait for somebody will write script for you. In that case you can wait forever
	Best regards, Darius
Suggestion To thank Quote Answer

1/3/2013 12:50 PM	Rate (0)
billwest Posts: 510 Rating: (120)	You could do this with animation instead of VB. The movement animation could move the arrow from point A to point B. Visibility could be used to make the arrow appear or disappear based on the value of your boolean. The following link is for theGetting Started STEP 7 Professional / WinCC Advanced V11 for sample project Filling Station: http://support.automation.siemens.com/WW/view/en/54430386 Follow the steps for the bottle animation for your arrow. This should do it based on the information you have provided. Good Luck billwest
billwest Posts: 510 Rating: (120)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on