Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Cofiguration of ET200S, IM151-7 CPU INTERFACE in Step 7

Created by: RAJKIRAN at: 2/7/2012 3:12 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/7/2012 3:12 PM	Rate (0)
RAJKIRAN Silver Member Joined: 8/18/2009 Last visit: 4/10/2023 Posts: 534 Rating: (33)	Dear Expert, I want to ConfigureET200S, IM151-7 CPU INTERFACE(6ES7151-7AA20-0AB0)in Step 7 , I could not get option to configure,Please tell me how to configure & if related Doc. Available.
	Rajkiran Patil
Suggestion To thank Quote Answer

2/7/2012 3:36 PM	Rate (0)
RAJKIRAN Silver Member Joined: 8/18/2009 Last visit: 4/10/2023 Posts: 534 Rating: (33)	I get this Configuration but I could not insert module2/4xAI RTD 2ch (6ES7 134 4JB51 0AB0) into slot. find attached doc. Please tell me what problem.... Attachment ET200S Problem.JPG (240 Downloads)
	Last edited by: RAJKIRAN at: 2/7/2012 3:37 PM Rajkiran Patil
Suggestion To thank Quote Answer

2/7/2012 3:45 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	Hello, Take a look at attachment. Best regards, Hristo Mihalev Attachment Untitled.jpg (250 Downloads)

Suggestion To thank Quote Answer

2/7/2012 8:45 PM	Rate (0)
Aret Posts: 2348 Rating: (259)	I little expanation to UMENCHO's picture - you configure ET200S as S7-300 station and insert CPU from corresponding folder accordingly. If you need to insert it as slave afterwards you should do it by Profibus DP->Configured stations folder.
Aret Posts: 2348 Rating: (259)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on