Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

collecting data from sensors and display data in WinCC

Created by: ALU at: 2/27/2009 8:24 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/27/2009 8:24 AM	Rate (0)
ALU Posts: 35 Rating: (0)	Import-User-2 Hello, without any PLC you can use only internal tags for the simulation. If you have STEP7 and PLCSIM, you can simulate an PLC and use the "SIMATIC Protocol Suite" with the connection MPI. An other way is to search for an WinCC AddOn, that can simulate external tags. Best Regards Technical Support Hello, I have Symatics Manager and CPU300 on my desk, I've successed collecting data from sensors to PLC via CP340 and store in DB11. Now I want to display those data in WinCC (I have installed WinCC7.0). What's tags should I need for this mission? (guide me step by step please...) Many thanks in advance!
ALU Posts: 35 Rating: (0)	Last edited by: Blue Moderator at: 11.03.2009 20:08 Splitted and renamed
Suggestion To thank Quote Answer

3/2/2009 2:01 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi have you seen this FAQ http://support.automation.siemens.com/WW/view/en/22014013 If you use SIMATIC S7 Protocol Suite it is described in WInCC online help
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on