Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

COM PROFIBUS

Created by: CGR013 at: 7/15/2009 9:43 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/15/2009 9:43 PM	Rate (0)
CGR013 Posts: 27 Rating: (0)	Hi ! Im using COM PROFIBUS for first time, and I have a question, Im using a CP5511 PCMCIA, in the "SET PC/PG INTERFACE" of the STEP7, appear OK, I use it every day. But in the "SET PC/PG INTERFACE" of the COM PROFIBUS, Does not appear, in fact only appers the PC INTERNAL. Any idea? How can I use the ConProfibus if I cant choose my CP 5511 ?? The manual, says that the CP5511 works ok but, it does not appear to me. The version is V5.1 Thanks in advance
CGR013 Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

7/16/2009 3:33 PM	Rate (0)
fritz Diamond Expert Joined: 10/7/2005 Last visit: 5/29/2023 Posts: 2965 Rating: (1025)	Hello EG0871 have a look at this thread and the links and info contained in it which I hope helps (and definetly try to install COMPB on a Partition or Laptop that does NOT have Step7 on it).
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on