Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

COM1430TF problem

Created by: yac at: 4/4/2010 10:11 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/4/2010 10:11 AM	Rate (0)
yac Posts: 31 Rating: (0)	Hi all, When I try to open any menu item in the com1430TF pogram, I get the message "Overlay does not exist". Can anyone tell me what does this mean? thanks
yac Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

4/6/2010 11:53 PM	Rate (0)
legacy support Silver Member Joined: 7/15/2008 Last visit: 10/6/2024 Posts: 382 Rating: (44)	Hello yac I ran into this problem, with different issiues. 1.) The program you are trying to open was saved with an old version of the COM software, like the old COM143. There is an import function in the TF software. 2.) The COM1430TF software is not installed propperly or corrupted. I hope this helps

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on