Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communicate between Fuzzy control++ v5.0 and Real PLC S7-300 CPU 315-2DP help me ?

Created by: leegiang at: 12/18/2009 4:22 AM (12 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

12/18/2009 4:22 AM	Rate (0)
leegiang Posts: 25 Rating: (0)	Dear Sir/Madam, I really need your help.In my project i need to communicate between PLC s7-300 CPU 315-2DP with Fuzzy control++ v5.0, but it doesn't conect.Please help me, how to set PG/PC and how to receive the DB30 Block from PLC(Is it true : we will get the DB30 block when they conect ) ? And my error : have problem with port conect with PLC they show that i have the wrong port to conect,but i use MPI card and it work very well.Can you show me the configuration about the Port to conect with fuzzy control++. Thanks you for reading this question. Best regard. le_el
leegiang Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

12/18/2009 8:24 AM	Rate (0)
Wüstenräuber Gold Member Joined: 10/3/2008 Last visit: 3/10/2023 Posts: 934 Rating: (120)	Hi, if you use the example blocks, then DB30 is the instance DB of the fuzzy block, isn't it? Attach a printscreen of the connection parameters in FuzzyControl++. Wüstenräuber

Suggestion To thank Quote Answer

12/18/2009 8:39 AM	Rate (0)
Wüstenräuber Gold Member Joined: 10/3/2008 Last visit: 3/10/2023 Posts: 934 Rating: (120)	PG/PC interface has to be set to "MPI" and you need SIMATIC NET SOFTNET for the S732.dll. Wüstenräuber

Suggestion To thank Quote Answer

12/18/2009 9:37 AM	Rate (0)
leegiang Posts: 25 Rating: (0)	Dear Wuestenraeuber, I have communicated by simulation but in real PLC it doesn't connect.Because my PG/PC setting is fault,i guess it.And on this picture is my setting. Best regard. le_el Attachment MY_PG_PC.zip (127 Downloads)
leegiang Posts: 25 Rating: (0)	Last edited by: leegiang at: 12/18/2009 9:38 AM
Suggestion To thank Quote Answer

12/18/2009 9:45 AM	Rate (0)
leegiang Posts: 25 Rating: (0)	Dear Wuestenraeuber, Here is my setting in fuzzy control to conect with real PLC and my fault. Could you help me ? Best regard. le_el Attachment setting_and_Fault.zip (115 Downloads)
leegiang Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

12/18/2009 9:57 AM	Rate (0)
Wüstenräuber Gold Member Joined: 10/3/2008 Last visit: 3/10/2023 Posts: 934 Rating: (120)	Hi, I can't unzip your attachments... Try again. Wüstenräuber

Suggestion To thank Quote Answer

12/18/2009 10:35 AM	Rate (0)
leegiang Posts: 25 Rating: (0)	Hi, I am sorry for this inconvenience.Here is my file. Best regard. Attachment MY_PG_PC.zip (87 Downloads)
leegiang Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

12/18/2009 10:36 AM	Rate (0)
leegiang Posts: 25 Rating: (0)	and here another error. Best regard. Attachment setting_and_Fault.zip (80 Downloads)
leegiang Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

12/18/2009 12:27 PM	Rate (0)
Wüstenräuber Gold Member Joined: 10/3/2008 Last visit: 3/10/2023 Posts: 934 Rating: (120)	Hi, I see the reason for your problem. The connection is not possible via a PC Adapter. You need a CP5512(MPI). Wüstenräuber

Suggestion To thank Quote Answer

12/18/2009 3:38 PM	Rate (0)
leegiang Posts: 25 Rating: (0)	Dear Wuestenraeuber, How can i get this adapter CP5512(MPI) ? Could you please show it for me? Thanks you so much. Best regard. le_el
leegiang Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on