Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communicate cpu 315-2DP with CP343-1 Lean and S7200 with the CP243-1 - establish connection

Created by: zulca at: 5/14/2009 6:56 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/14/2009 6:56 AM	Rate (0)
zulca Posts: 7 Rating: (0)	Hello J_Bell I do have a similar problem trying to communicate a cpu 315-2DP with a CP343-1 Lean and a S7200 with the CP243-1, i do have access to both programs but when i tryto Select for the connection partner „unspecified i keep getting an error that wont let me complete the procedure, what am i doing wrong ? Regards,
zulca Posts: 7 Rating: (0)	Last edited by: CS Moderator at: 5/14/2009 12:20 PM new subject after splitting
Suggestion To thank

5/14/2009 12:53 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, I do not know if you are aware of the fact that the CP 343-1 Lean is not capable of handling both sided configured S7-Connections. It is only a S7-Server, so other systems may access the PLC by using singe sided configured connections themselves. So if you try to configure a S7-Connection by the use of the CP 343-1 Lean STEP7 should tell you that the nodes involved or at least one is not capable of doing this. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank

10/20/2009 5:27 AM	Rate (0)
zulca Posts: 7 Rating: (0)	I was able to achieve comunnicationbetween the S7200 and S7300. Thanks
zulca Posts: 7 Rating: (0)
Suggestion To thank

10/20/2009 7:33 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already discussed in the thread with the subejct Communication 315-2DP and S7-226 (CP243-1 IT). Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on