Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communicate

Created by: johnnyray1009 at: 2/20/2014 5:28 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/20/2014 5:28 AM	Rate (0)
johnnyray1009 Posts: 11 Rating: (0)	Hello every one, I have a PLC 1214C DC/DC/DC, no HMI touch, I created one programe and I inserted a PC system Wincc RT advance, I load programe to PLC, I created a creen in PC system, I made a HMI connection between PC system and PLC, I set PC/PG interface, and i run simulator, but HMI on PC not communication with PLC s7-1200, what is mistake? what is software I need to communication between PLC and HMI on PC, or they can communication directly? Thank you so much!
johnnyray1009 Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

2/20/2014 2:48 PM	Rate (0)
The Brain Gold Member Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating: (121)	Hey, there are a lot of possibility what could be wrong! Did you know this FAQs? -> http://support.automation.siemens.com/WW/view/en/88193789 -> http://support.automation.siemens.com/WW/view/en/62612087 -> http://support.automation.siemens.com/WW/view/en/38111886 regards,

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on