Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communicating S7-1200 & S7-1300 with an Allen Bradley HMI (2711R-T7T)

Created by: Tayyab at: 11/3/2015 10:21 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/3/2015 10:21 AM	Rate (0)
Tayyab Posts: 6 Rating: (0)	Hello, I am having troubles while trying to establish a communication in between S7-1200 or S7-1300 PLC with an Allen Bradley HMI (2711R-T7T) graphics terminal. I know (through the forums) that it is possible and it can be done by using RS-232 port or ethernet (MODBUS). But i don' know how. It would be a pleasure if someone can guide me about it. Thanks.
Tayyab Posts: 6 Rating: (0)	Last edited by: Tayyab at: 11/3/2015 10:22:11 AM
Suggestion To thank

11/3/2015 10:55 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 1/17/2025 Posts: 4108 Rating: (618)	Hi Tayyab, at the Siemens Support Homepage there ist an application example called "Connection of SIMATIC components with Allen-Bradley components" https://support.industry.siemens.com/cs/ww/en/view/32989862 I think / hope this could help you! Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank

11/3/2015 2:07 PM	Rate (0)
Wit_Moderator Moderator Joined: 8/21/2014 Last visit: 1/16/2025 Posts: 1036 Rating: (14)	This post is postet twice. Please continue here, if there is more to discuss: https://support.industry.siemens.com/tf/de/en/posts/136698/
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Wit_Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on