Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication between 2 S7 300 CPU via ethernet!

Created by: Meritor at: 2/9/2007 9:46 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/9/2007 9:46 AM	Rate (0)
Meritor Posts: 33 Rating: (2)	Dear All! Can you tell me that what is the easiest way to communicate between 2 S7 CPU (315-2DP, 317-2DP) via ethernet? Both PLC has the same CP card: 6GK7343-1EX11-0XE0 I have already tried with FC5, and FC6 but I got the following error code: 8090H note: The module has the right base adress....so it must be OK The ID also OK. Do you have any idea what can be the problem or can you suggest an other sollution? Thanks in advance!
Meritor Posts: 33 Rating: (2)
Suggestion To thank Quote Answer

2/9/2007 10:26 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Dear Meritor, would you tell us what Object Properties / General Part 2 the FC 5 / FC 6 has you used? Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

2/12/2007 8:23 AM	Rate (0)
Meritor Posts: 33 Rating: (2)	Dear Mr. Bell, I have just checked the properties of the FC5 and 6 and realized that I use the FC5,6 which are belong to the CP400. As soon as I replaced to the CP300 it was working well without any problem. Thanks for your tipp..... Norbert
Meritor Posts: 33 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on