Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication between CPU313C and Two diffrent PC station via mpi

Created by: mishi at: 6/10/2009 6:21 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/10/2009 6:21 AM	Rate (0)
mishi Posts: 7 Rating: (0)	Dear friend i want to communicate S7 313c CPU with two diffrent pc station, one pc station having wincc v5.0 and another one having cimplicity scada which supports siemens mpi. in hardware configuration of S7 i configured two pc stations with diffrent MPI addresses. now i would like two know is there any other software required to communicate them. how i can send or recieve data from 313c cpu to pc stations and vise versa .
mishi Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/10/2009 8:06 AM	Rate (0)
umencho Diamond Expert Joined: 3/21/2006 Last visit: 2/6/2025 Posts: 10239 Rating: (1182)	Hello mishi, Perhaps this FAQ could helps: How do you configure an S7 connection via MPI with the SIMATIC NET OPC server and the SIMATIC NET PC software? Regards Hristo Mihalev
	Last edited by: UMENCHO at: 6/10/2009 8:07 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on