Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication between PLCSim (Step 7 V5.5) and Comfot Panels

Created by: RaiMahi at: 2/25/2014 1:01 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/25/2014 1:01 PM	Rate (0)
RaiMahi Posts: 47 Rating: (0)	Hi I am working with WINCC V12(TIA Portal) and Step7 V5.5. I have downloaded the designed screens on Comfort Panels. I have used TAG Converter to associate tags amongst WINCC V12 and Step7 V5.5. I want to test the screens on Comort Panels using PLCSIM. But tags are not being communicated with panels. If I use WINCC Runtime , the screens are working fine so the problem is not with tag association or screen or step7 logic. How can I use PLCSIM to test the screens on Comfort panels. Thanks
RaiMahi Posts: 47 Rating: (0)
Suggestion To thank Quote Answer

2/25/2014 1:07 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/10/2025 Posts: 8801 Rating: (1172)	Hello RaiMahi, Have you seen this thread: /tf/WW/en/Posts/37055 Best regards, Wizard

Suggestion To thank Quote Answer

2/25/2014 1:26 PM	Rate (0)
RaiMahi Posts: 47 Rating: (0)	Hello Wizard Thank you for your response. How am i supposed to test my screens can u suggest any other way or any other tool. I don't have PLC yet and I wanted to make sure the screens are working properly before i get he PLC.!!! Thanks
RaiMahi Posts: 47 Rating: (0)
Suggestion To thank Quote Answer

2/25/2014 1:39 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/10/2025 Posts: 8801 Rating: (1172)	Hello, You can use PLCSIM and simulate the panel on your PC. (You have already done ) Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on