Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication between s7 200 and Wincc Flexible Runtimr via OPC

Created by: hosna at: 5/20/2011 7:18 AM (12 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

5/27/2011 9:13 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 5/3/2024 Posts: 5697 Rating: (715)	I'll giv it a try You have the pc/ppi cable you said. Make a S7200 connection in your project and follow the settings wicht are shown in the attached picture. Best regards, Marcjan Attachment winccflex.JPG (113 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

5/21/2012 4:51 PM	Rate (0)
Out Control Posts: 204 Rating: (1)	Dear marcjan your setting for TP170B color ....if we need to use wincc flexible runtime ..what should we do ??? are you tried that ?? it's worked??? Best Regards
Out Control Posts: 204 Rating: (1)
Suggestion To thank Quote Answer

5/21/2012 5:13 PM	Rate (0)
Niranjan Prasad Posts: 691 Rating: (37)	Out Control Dear marcjan your setting for TP170B color ....if we need to use wincc flexible runtime ..what should we do ??? are you tried that ?? it's worked??? Best Regards In case of PC Runtime , You need to set the Communication Settings in Set PG/PC Interface and in the the WinCC Flexible Configuration also ( as suggested by Marcjan)
Niranjan Prasad Posts: 691 Rating: (37)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on