Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication between WinCC Unified and Fanuc OPC Server Software

Created by: Huynh Van Phuoc at: 2/12/2022 4:34 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

2/12/2022 4:34 AM	Rate (0)
Huynh Van Phuoc Member Joined: 1/18/2022 Last visit: 2/14/2022 Posts: 1 Rating: (0)	Hi there, Can you give me a recommend. I have a problem as below: In a computer, I have two softwares: WinCC Unified and Fanuc OPC Server Software. Can I get data from the Fanuc OPC Server Software and transfer to WinCC Unified (as OPC UA Client) and how to do if it is possible. Thank you so much.

Suggestion To thank Quote Answer

2/14/2022 11:25 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/24/2025 Posts: 4397 Rating: (1464)	Hi, e.g. the WinCC Unified could be a OPC Client Project tree -> PC Unified -> HMI RT -> Connection-> <Add new> -> communication driver = OPC UA Before you fill the connection / tag data, you can check it with an independent software (like UA Expert).
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

9/10/2024 6:50 AM	Rate (0)
AutoGen_4654942 Joined: 2/7/2023 Last visit: 11/25/2024 Posts: 1 Rating: (0)	Bonjour Merc de votre aide, mais lorsque je veux me connecter au serveur OPCUA Fanuc si je mets signe et encrypte il me de demande un mot de passe et impossible de créer un tag . Je dois me mettre un mot de passe et impossible de trouver quel mot de passe . Merci de votre aide

Suggestion To thank Quote Answer

9/10/2024 11:33 AM	Rate (0)
Wit_Moderator Moderator Joined: 8/21/2014 Last visit: 1/23/2025 Posts: 1036 Rating: (14)	Hello AutoGen_4654942, Please try to discuss your question in English language. This is an internationalcommunityand we try to focus on one language. Posting in English will help you to get more response to your question. This is the translation of your question: AutoGen_4654942 Hello Thank you for your help, but when I want to connect to the Fanuc OPCUA server if I put sign and encrypt it asks me for a password and I can't create a tag. I have to enter a password but I can't find it. Thank you for your help Best Regards, Wit_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Wit_Moderator
Suggestion To thank Quote Answer

9/17/2024 9:00 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 1/24/2025 Posts: 14651 Rating: (1824)	AutoGen_4654942 Bonjour Merc de votre aide, mais lorsque je veux me connecter au serveur OPCUA Fanuc si je mets signe et encrypte il me de demande un mot de passe et impossible de créer un tag . Je dois me mettre un mot de passe et impossible de trouver quel mot de passe . Merci de votre aide Hello I´m not sure which Pw is needed, check in your Runtime Settings if you use the encrypt transfer: I have used often OPC UA connections in WinCC Unified but never needed a PW for the configuration access Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on