Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication JBUS

Created by: dell34 at: 7/22/2006 9:53 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/22/2006 9:53 PM	Rate (0)
dell34 Posts: 1 Rating: (0)	hello; I have an PLC PB400 APRIL and I use a IHM with WINCC. my problem wants is how to communicate with the PB400 to obtain the e/s. thank you
dell34 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/23/2006 11:40 AM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	[quote user="dell34"]I have an PLC PB400 APRIL and I use a IHM with WINCC. my problem wants is how to communicate with the PB400 to obtain the e/s. thank you Hi Dell, I have no experience with the APRIL PB400 PLC but please give the possibilitys to communicate from that system to another system. JBUS is (sofarI know) a Modbus alike protocol, whe have built for a customer some time ago some software on basis of Modbus in a S7-400 with a CP441-2 and the Modbus Master. Is there a possibility to couple to S7 and then to the WinCC (do you mean WinCC or WinCC Flexible).
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on