SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

Communication problem over TCP/ IP (PC to siemens camera MV420)

2/13/2013 5:54 PM	Rate (0)
All4here Posts: 30 Rating: (0)	hello every one. i am trying to communicate to siemens camera MV420. these are the settings camera : ip 192.168.0.3 subnet: 255.255.255.0 computer: ip 192.168.0.3 subnet: 255.255.255.0 when i ping the camera it give a responce.but when i open the internet explorer and write the camera ip...when setting is open but they said no tcp ip connection. so i get the tcp ip connection error. i also set the tcp as triger to this camera and also set the tcp for receving the responce string from the camera.but i don't what i need to do more to fix this problem. please guide me thank you
All4here Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

2/14/2013 9:32 AM	Rate (0)
Rated X Posts: 1547 Rating: (129)	Hi, so both devices are really using the same IP 192.168.0.3? > This is not a good idea and can't work. You'll have to change one IPwithin the last byte(eg 192.168.0.4) Changing one of the others (eg 192.168.1.3) will get device into a different subnet, which can't work either. (Assuming there's not a router in between)
Rated X Posts: 1547 Rating: (129)
Suggestion To thank Quote Answer

2/14/2013 12:07 PM	Rate (0)
All4here Posts: 30 Rating: (0)	sory.. it was my mistake.. i use different ip address and same subnet mask but no result
All4here Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

2/15/2013 2:03 PM	Rate (0)
Rated X Posts: 1547 Rating: (129)	Ok, so could you double check: - Primary Setup Tool, search and check whether the IP matching the camera. - Try a different browser. - You'll need Java for some functions, however the first sceen has to show up in any case.
Rated X Posts: 1547 Rating: (129)
Suggestion To thank Quote Answer

3/25/2015 12:16 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by lubomir.jusko is split to a separate thread with the subject MV420, can't go to adjustment site. Best regards Min_Moderator

Suggestion To thank Quote Answer

Share this page:

Share this page on...