Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication Problem with MP377

Created by: Wacker at: 6/10/2009 6:41 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/10/2009 6:41 AM	Rate (0)
Wacker Posts: 5 Rating: (0)	Hi, I have problem communicating with MP377. I am using ethernet X cable for communication between Configuration PC and MP377. The transfer settings in MP and PG/PC settings in PC are OK. I can ping both ways i.e from PC to MP and vice versa. But when I click check device settings from PROSAVE, communication starts, in MP message changes from "connecting to host" to "transferring data". But in PC message comes "communication is interrupted" after some time. Please help.
Wacker Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

6/10/2009 7:38 AM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 9/29/2023 Posts: 4477 Rating: (830)	Hello, Please read carefully this thread. I think it will be very useful for you. Regards,
	Ayman Elotaify
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on