Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication problems WinCC 6.2 Redundancy CP 1613

Created by: Marko80 at: 9/5/2007 4:17 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/5/2007 4:17 PM	Rate (0)
Marko80 Posts: 24 Rating: (0)	Hello, I have a problem with loosing communication to PLC's when I switching on second redundancy server WinCC runtime.Sometimes communication is not stable. I have 2 redundancy serversfor WinCC 6.2 on Windows 2003 Server system. For communication between PLCS7-417and servers I am using CP 1613. Interface parametr is set for CP1613(RFC1006) on both servers I setNDIS IP adrees in LAN properties . There is no problem with one server , when it is working separately wihout backup server it is ok. How to solve this problem, maybe I should set some settings.? Thanks for answer. Marko
Marko80 Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

9/6/2007 12:12 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, have You checked the following FAQs http://support.automation.siemens.com/WW/view/en/10805598/133000 Check also Your diagnostic files in WinCC http://support.automation.siemens.com/WW/view/en/22892165 Good luck April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on