Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication Proxy to HMI TP1200 COMFORT "DP"

Created by: KevinDias at: 8/20/2018 9:08 PM (24 Replies)

Rating (1)

Thanks 3

Result pages:: |; 1 | 2 | 3; |

25 Entries

Entries per page: 10 | 20 | all

8/20/2018 9:08 PM	Rate (0)
KevinDias Experienced Member Joined: 2/4/2018 Last visit: 2/6/2023 Posts: 55 Rating: (0)	Hello experts, i need a help , have a problem to communication between my CLP S300 to HMI ! I can not comunicate my CPU S7300 with HMI TP1200, my configuration is with DP address, all correct but I can not do the hardware to fill the DB's Online (values). in the Ethernet configuration I can raise the HMI, but in DP not ! what can it be ? Please, need a help!
	Regards KD BR
Suggestion To thank Quote Answer

8/20/2018 9:24 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 3/13/2023 Posts: 4617 Rating: (700)	KevinDias Hello experts, i need a help , have a problem to communication between my CLP S300 to HMI ! I can not comunicate my CPU S7300 with HMI TP1200, my configuration is with DP address, all correct but I can not do the hardware to fill the DB's Online (values). in the Ethernet configuration I can raise the HMI, but in DP not ! what can it be ? Please, need a help! Hello, from the title (Proxy) seems you have S7 300 with STEP7 Classic v5.5 and HMI TIA Portal, have you already seen this: https://support.industry.siemens.com/cs/ww/en/view/73502293
	Last edited by: Jen_Moderator at: 8/21/2018 12:41:29 PM Optimized link.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Md Gouse

8/20/2018 9:42 PM	Rate (0)
KevinDias Experienced Member Joined: 2/4/2018 Last visit: 2/6/2023 Posts: 55 Rating: (0)	Hello Ste39 , thx for the answer. yes I already saw this topic, but I can not make the communication of the proxy with the CPU, via DP violet! I did and re-read it several times to try to identify something, but I still have difficulty uploading the HMI.
	Regards KD BR
Suggestion To thank Quote Answer

8/20/2018 10:03 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 3/13/2023 Posts: 4617 Rating: (700)	KevinDias Hello Ste39 , thx for the answer. yes I already saw this topic, but I can not make the communication of the proxy with the CPU, via DP violet! I did and re-read it several times to try to identify something, but I still have difficulty uploading the HMI. Hello, When you compile project no error? Have really CPU and HMi? The connection between both is ok?

Suggestion To thank Quote Answer

8/21/2018 4:31 AM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 3/20/2023 Posts: 2794 Rating: (454)	Hello Kevin, KevinDias yes I already saw this topic, but I can not make the communication of the proxy with the CPU, via DP violet! the standard configuration of the HMI-port is MPI. Then the port in the graphical view is orange. click on the port go to Properties > General > MPI address in section Parameters change the Interface type from MPI to Profibus Then the port is violet and it should be possible to connect it to the Profibus network. Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

8/21/2018 1:11 PM	Rate (0)
KevinDias Experienced Member Joined: 2/4/2018 Last visit: 2/6/2023 Posts: 55 Rating: (0)	Ste39 Ste39 , in reality, as a proxy only CP appears. on ethernet connection, I can change values. Hello Ste39 , thx for the answer. yes I already saw this topic, but I can not make the communication of the proxy with the CPU, via DP violet! I did and re-read it several times to try to identify something, but I still have difficulty uploading the HMI. Hello, When you compile project no error? Have really CPU and HMi? The connection between both is ok?
	Regards KD BR
Suggestion To thank Quote Answer

8/21/2018 1:16 PM	Rate (0)
KevinDias Experienced Member Joined: 2/4/2018 Last visit: 2/6/2023 Posts: 55 Rating: (0)	Prof. Frink Hello Frink , I edit the standard configuration , but I still have the mistake , I configured for violet OR Profibus DP. I have 4, TP 1200 comfort , a need install in machine , but the communication is PROFIBUS DP. KevinDias yes I already saw this topic, but I can not make the communication of the proxy with the CPU, via DP violet! the standard configuration of the HMI-port is MPI. Then the port in the graphical view is orange. click on the port go to Properties > General > MPI address in section Parameters change the Interface type from MPI to Profibus Then the port is violet and it should be possible to connect it to the Profibus network. Regards, Frink
	Regards KD BR
Suggestion To thank Quote Answer

8/21/2018 1:23 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2818)	Hello, 1.) please dont post new text in the quote! do you have a screen what exactly is not possible? Is a PROFIBUS Network connected to the Proxy in TIA Network view? Please make a screen of the network with the devices. Regards Christoph

Suggestion To thank Quote Answer

8/22/2018 1:07 PM	Rate (0)
KevinDias Experienced Member Joined: 2/4/2018 Last visit: 2/6/2023 Posts: 55 Rating: (0)	My problem is the photo ! please help. Attachment IMG_5041.JPG (91 Downloads)
	Regards KD BR
Suggestion To thank Quote Answer

8/22/2018 1:09 PM	Rate (0)
KevinDias Experienced Member Joined: 2/4/2018 Last visit: 2/6/2023 Posts: 55 Rating: (0)	Conecction Porfibus DP, attachment photo. Attachment IMG_5042.JPG (75 Downloads)
	Regards KD BR
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on