Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

communication ultramat 23 and S7-1200 by ELAN protocol

Created by: adamcz91 at: 7/29/2014 2:07 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

7/29/2014 2:07 PM	Rate (0)
adamcz91 Experienced Member Joined: 6/4/2014 Last visit: 11/29/2024 Posts: 8 Rating: (0)	Hello, I have to make easy program on s7-1200which will read the measured value from ultramat 23. Can I use for this ELAN protocol? How to start? Which functions I have to use to make this communication?

Suggestion To thank Quote Answer

8/5/2014 9:17 AM	Rate (0)
Tribute Regular Member Joined: 3/27/2007 Last visit: 10/6/2016 Posts: 13 Rating: (2)	Dear Adamcz91, when used externally, the RS 485 interface requires software matched to the analyzer, e.g. SIPROM GA. SIPROM GA is a software programm for communication between PC/Laptop and analyzers. Best regards Tribute

Suggestion To thank Quote Answer

8/19/2014 3:16 PM	Rate (0)
adamcz91 Experienced Member Joined: 6/4/2014 Last visit: 11/29/2024 Posts: 8 Rating: (0)	But SIPROM GA is used to communicate ultramat 23 with PC. Maybe somebody make communication ultramat 23 - S7-1200? (my ultramat haven't got profibus)

Suggestion To thank Quote Answer

8/22/2014 12:25 PM	Rate (0)
synowiecki.mateusz Posts: 1 Rating: (0)	adamcz91 But SIPROM GA is used to communicate ultramat 23 with PC. Maybe somebody make communication ultramat 23 - S7-1200? (my ultramat haven't got profibus) I have this same problem so renew the question... it is any REAL expert here?
synowiecki.mateusz Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

3/19/2018 7:55 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (173)	New question published by SohaibManzoor is split to a separate thread with the subject Ultramat 23 is not transmitting data to PLC. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on