Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication WinCC with S40 OPC Server Moeller.

Created by: GAP at: 6/17/2008 4:44 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/17/2008 4:44 PM	Rate (0)
GAP Posts: 56 Rating: (0)	Hello, I have a problem in the communication between WinCC and the S40 OPC server of Moeller. I have installed WinCC V6.2 in a PC with Windows 2003 server SP1, I also have the S40 OPC server of Moeller for the communication with the PLC PS4 201 MM1 of the same company. WinCC communicates with the S40 OPC server, but when I close the project that I open up it again it doesn't load the editors. This has happened me several times, I think that the problem is with the S40 OPC sever of Moeller.
GAP Posts: 56 Rating: (0)
Suggestion To thank Quote Answer

6/18/2008 8:54 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, if you have problems with Moeller communication search for solution at www.moeller.net This is a WinCC Forum
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on