Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

communication with cpu 313c using cp5611 and opc server and vb 6.0

Created by: Pallavi at: 11/29/2008 6:05 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/29/2008 6:05 AM	Rate (0)
Pallavi Posts: 1 Rating: (0)	hi i am very new to this communication. what i know is i am using DP protocoland PROFIBUS i hv added simatic station and opc server in simatic manager s/w i don.t know the further configuration. can anybody tell me the proper method to access plc using vb6.0 and SIMATIC NET s/w. plz help me out. i hv to complete my project as early as possible. plzzzzzzzzzzzzz help me out.
Pallavi Posts: 1 Rating: (0)	Last edited by: Pallavi at: 11/29/2008 6:08 AM
Suggestion To thank Quote Answer

12/3/2008 2:36 PM	Rate (0)
FrankW. Posts: 162 Rating: (23)	Hi, see "start menu" -> SIMATIC -> Simatic Net -> Commissioning PC Stations......pdf -> Cap. 8 Best regards FrankW
FrankW. Posts: 162 Rating: (23)
Suggestion To thank Quote Answer

12/3/2008 3:21 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello. to be precisely I think these 12 pages may help you. Best regards J_Bell Attachment mn_ncm-pc_76_OPC_DP.pdf (257 Downloads)
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on