Ayman Elotaify

Hi,

There is an error in compilation and you have to clear it before downloading. Click on the error row to go to the error and rectify it. then compile and download.

 Thanks for your help. I fixed the errors. New problem: When downloading the program to the panel, I see an error: 'Components with a different version are installed on the target device´. See attachement left side. Selecting the 'fit' causes the following types of errors. See next attachement right side. I don't know what i could try next..

------------------------------------------------------------------------------------------
Split from Download is always interrupted.

Jarogo

 

Ayman Elotaify

Hi,

There is an error in compilation and you have to clear it before downloading. Click on the error row to go to the error and rectify it. then compile and download.

 Thanks for your help. I fixed the errors. New problem: When downloading the program to the panel, I see an error: 'Components with a different version are installed on the target device´. See attachement left side. Selecting the 'fit' causes the following types of errors. See next attachement right side. I don't know what i could try next..

 Hi,

This means that the panel has an image with a TIA version different than the version of your project. Both should be matched.

And it seems that this image is not installed on your PC. But first, make a try to make OS update using Prosave or you can do it with TIA. If really you don't have this image, you can download it from the link below. Just download images related to TIA version of your project. Then start again Prosave / TIA and make OS update and browse for the folder you downloaded.

Image Downloads for HMI Operator Panels

Ayman Elotaify

 Hi,

This means that the panel has an image with a TIA version different than the version of your project. Both should be matched.

And it seems that this image is not installed on your PC. But first, make a try to make OS update using Prosave or you can do it with TIA. If really you don't have this image, you can download it from the link below. Just download images related to TIA version of your project. Then start again Prosave / TIA and make OS update and browse for the folder you downloaded.

Image Downloads for HMI Operator Panels

 Thank you again. Now the transfer works.I upgraded the panel firmware from 15.xxxx  to version 16.xxxx via USB stick.