Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

configuration IO-device / PLCsim

Created by: azu at: 6/16/2014 1:46 PM (3 Replies)

Rating (0)

Thanks 2

4 Entries

6/16/2014 1:46 PM	Rate (0)
azu Advanced Member Joined: 7/10/2008 Last visit: 11/17/2022 Posts: 32 Rating: (1)	Hallo members. Question: Is it possible to test IO-devices in PLCsim. I have one IO-device (CPU315) connected with two I-Devices (also CPU315). There are two transfer area's for each I-device configurated. When two plcsim environment are running , i cannot see the data in the other CPU. ( TIA V12 SP1 Update 4) ThanX Pietr Attachment IO_device.JPG (159 Downloads)

Suggestion To thank Quote Answer

6/17/2014 10:51 AM	Rate (0)
H_a_m_m_y Experienced Member Joined: 8/19/2013 Last visit: 2/14/2019 Posts: 148 Rating: (10)	Hello azu, i startet a first test - it is not working too ... later i will try it again - sounds interesting Regards !

Suggestion To thank Quote Answer

6/17/2014 4:18 PM	Rate (0)
azu Advanced Member Joined: 7/10/2008 Last visit: 11/17/2022 Posts: 32 Rating: (1)	Thank you H_a_m_m_y for trying:-)

Suggestion To thank Quote Answer

6/30/2014 12:17 PM	Rate (0)
azu Advanced Member Joined: 7/10/2008 Last visit: 11/17/2022 Posts: 32 Rating: (1)	It is not possible to test IO <>I device communication with PLC sim. A siemens guy told me that. My question is answered ThanX

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users H_a_m_m_y AutoGen_3010114

|

Share this page:

Share this page on...

Follow us on