Operating System is Windows 10

Run time works on windows 7 v12-advanced

Hi, Murof. Actually my problem is how to change PC station time format, thats all.

I have configured date-time with a PLC . The date-time tag which from PLC read the PLC system

time and I have used the tag instead of system time at HMI.  Everthing is ok no problem only

problem is PC station time format can not be changed (I could not, should be solve any way).

If you know how to change PC station time format I need your help.(without changing region

please)

I am using Tia portal step 7 and wincc prof. v13 sp1 update 9 ;

CPU 314C-2 PN/DP

TP 1500 Panel

s7-1200 CPU 1211C DC/DC/DC +cm1241 for only modbus

ESA-WARE PC windows 7 installed RT-Advanced V12

Not: I am testing with simulation tia portal prof. v13 not RT-advanced v12.

Thanks for your interest.

Hi, Murof. Thank you for repliyings. I understood now. Okey now I need vbcodes I have a knowledge how to write codes with pascal and delphi. Vbcodes will not be foreign for me but I have never done any project with it. I know I have to use it in Tia, just need codes If you have it will be nice.

Thanks for your interest.

Hello Yusuf_TUNÇ,

here is a forum thread where i did post some links for VBS beginners:

• Training Manual/Document for learning VB Scripting in WinCC

It doesn't directly fit your need, but it might help you get a general overview.

eventually, I have solved the problem. I was making mistake when I chaged the PC Regional Settings of windows time format. There were two time setting, one of them is short the other is long. I only changed to the short than I was not working. In my project I was using long time format:-)))