Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Configure DB1

Created by: Gustavo Dias at: 9/21/2017 12:51 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/21/2017 12:51 PM	Rate (0)
Gustavo Dias Experienced Member Joined: 10/7/2016 Last visit: 5/22/2024 Posts: 66 Rating: (1)	Hi all, In my project I have one rack with CPU and one remote rack using IM for communication. Now I need to take off this remote rack and use only CPU rack. DB1 has all input channels (4..51) and now I will use only 4..16, 47..51, i can only remove inputs that I'll not use or I need to config in another place?

Suggestion To thank Quote Answer

10/3/2017 11:51 AM	Rate (0)
dstudio Bronze Member Joined: 8/24/2006 Last visit: 5/31/2024 Posts: 148 Rating: (9)	Hi, which cpu exactly?

Suggestion To thank Quote Answer

10/6/2017 1:13 PM	Rate (0)
Gustavo Dias Experienced Member Joined: 10/7/2016 Last visit: 5/22/2024 Posts: 66 Rating: (1)	928B

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on