Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Configure DP Master Module 6GK7 242-5DX30-0XE0 as DP salve

Created by: Ravi Teja Pabolu at: 12/14/2013 10:53 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

12/14/2013 10:53 AM	Rate (0)
Ravi Teja Pabolu Posts: 18 Rating: (0)	hi , [snip] ... Can i configure DP Master Module6GK7 242-5DX30-0XE0 as DP salve module6GK7 242-5DX30-0XE0 . Can anyone describe the difference between them. Thanks & Regards Ravi
Ravi Teja Pabolu Posts: 18 Rating: (0)	Last edited by: CS Moderator at: 12/16/2013 2:31 PM new subject after splitting from /tf/WW/en/Posts/101602#top
Suggestion To thank Quote Answer

12/17/2013 1:15 PM	Rate (0)
Pittiplatsch Posts: 1368 Rating: (126)	Hello Ravi, there are two PROFIBUS modules for the S7-1200: CM 1242-5 as DP Slave 6GK7 242-5DX30-0XE0 CM 1253-5 as DP Master 6GK7 243-5DX30-0XE0 You can not configure the 6GK7 243-5DX30-0XE0 as DP Slave, therefore you must use 6GK7 242-5DX30-0XE0 Greetings, Pittiplatsch
Pittiplatsch Posts: 1368 Rating: (126)
Suggestion To thank Quote Answer

5/30/2014 1:44 PM	Rate (0)
MS1981 Silver Member Joined: 4/14/2010 Last visit: 1/12/2023 Posts: 502 Rating: (11)	Dear Pittiplatch, Can i configure CM 1242-5 6GK7 242-5DX30-0XE0 DP Slave as DP master..?? Thanks.
	MS
Suggestion To thank Quote Answer

5/30/2014 1:47 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	NO.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on