Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Configure V90 drive with Tia Portal

Created by: DavidBrown at: 9/13/2017 3:53 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

9/13/2017 3:53 PM	Rate (0)
DavidBrown Gold Member Joined: 6/29/2012 Last visit: 12/25/2023 Posts: 975 Rating: (9)	I heard somewhere that a V90 drive could be completely configured with TIA portal? Is this true, or only partial? Or do we still need the V-assistant.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Mukesh Singh

9/14/2017 3:30 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/2/2024 Posts: 5953 Rating: (819)	Hello with HSP on principle yes when using standard functionality. Not all parameter are visible in TIA, in this case V-Assistant is necessary. Please note: EPOS is not available with HSP
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

9/15/2017 9:10 PM	Rate (0)
DavidBrown Gold Member Joined: 6/29/2012 Last visit: 12/25/2023 Posts: 975 Rating: (9)	Where can this HSP be found? Is there some documentation about configuring V90 in Tia?

Suggestion To thank Quote Answer

9/16/2017 6:29 AM	Rate (0)
@KB@ Silver Member Joined: 7/30/2012 Last visit: 11/28/2024 Posts: 335 Rating: (12)	Hello!!! Maybe This Denouements Will Help You... https://support.industry.siemens.com/cs/document/109747750/sinamics-v90-pn%3A-basic-positioner-(epos)?dti=0&lc=en-WW https://support.industry.siemens.com/cs/document/109739053/position-control-of-sinamics-v90-with-simatic-s7-1500-via-irt-profinet?dti=0&lc=en-WW

Suggestion To thank Quote Answer

10/19/2017 3:21 PM	Rate (0)
DavidBrown Gold Member Joined: 6/29/2012 Last visit: 12/25/2023 Posts: 975 Rating: (9)	I suppose only a very limited amount of parameters are available in Tia Portal. I see in my case that f.I. acceleration (p1120) and deceleration (p1121) are not even visible. Or is there something wrong with my configuration?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on