6/23/2021 1:49 PM | |
Joined: 10/11/2006 Last visit: 4/24/2024 Posts: 5823 Rating: (789)
|
Hello, 100% relates to 100 degree. https://support.industry.siemens.com/cs/ww/en/view/59414036 It is possible with startdrive, to do telegram extension. You do this in the device view under properties. |
With best regards, |
|
6/24/2021 11:44 PM | |
Joined: 1/14/2014 Last visit: 3/13/2023 Posts: 112 Rating: (1) |
Einstein, thanks for that helpful info. I edited my post above, any take on the conversion issues? |
6/25/2021 11:44 PM | |
Joined: 1/14/2014 Last visit: 3/13/2023 Posts: 112 Rating: (1) |
Hmm, looks like I still have the temperature scaling issue. Everything else other than temperature scales properly. See attached. AttachmentTemp Scaling Issue.zip (269 Downloads) |
7/1/2021 3:48 PM | |
Joined: 10/11/2006 Last visit: 4/24/2024 Posts: 5823 Rating: (789)
|
Hello, depending on the CU you use, the parameter are described in the list manual. https://support.industry.siemens.com/cs/ww/en/view/109782301 https://support.industry.siemens.com/cs/ww/en/view/109782287 |
With best regards, |
|
7/2/2021 7:35 PM | |
Joined: 1/14/2014 Last visit: 3/13/2023 Posts: 112 Rating: (1) |
|
7/5/2021 11:12 AM | |
Joined: 10/11/2006 Last visit: 4/24/2024 Posts: 5823 Rating: (789)
|
Hello, because P627 there is function diagramm 8017 in the list manual. Because motor commissioning: It is described in the manual, it is not necessary to set every parameter manually. https://support.industry.siemens.com/cs/ww/en/view/10978286 5.3 Preparing for commissioning 5.3.1 Collecting motor data 5.3.3 Converter factory setting 5.4 Quick commissioning using the BOP-2 operator panel |
With best regards, |
|
Follow us on