Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Configuring the redundant ethernet port - IPC 547D

Created by: Ganeshraj at: 7/5/2012 11:41 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/5/2012 11:41 AM	Rate (0)
Ganeshraj Posts: 32 Rating: (1)	Hi, how to configure redundancy with two teaming-capable Gigabit Ethernet connections in simatic ipc 547d
Ganeshraj Posts: 32 Rating: (1)
Suggestion To thank Quote Answer

7/12/2012 2:10 PM	Rate (0)
Ganeshraj Posts: 32 Rating: (1)	Does the ehternet card comes with IPC a Intel product? Can I follow the instruction given on Intel wepsite: http://www.intel.com/support/network/sb/cs-009747.htm
Ganeshraj Posts: 32 Rating: (1)
Suggestion To thank Quote Answer

8/29/2012 12:31 PM	Rate (0)
Michael K Gold Member Joined: 9/3/2008 Last visit: 12/11/2024 Posts: 929 Rating: (163)	The Intel driver that comes with the IPC contains the manager to team the netcards. You can use the description from the Intel site to team the cards. If the IPC factory/restore image does not contain the driver manager or you install the operating system on the IPC yourself from scratch, the Intel driver is on the Documentation and Drivers dvd. Regards Michael
	Michael
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on