Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connect a DB element to a CFC blocks

Created by: Khaled_Ezzat at: 4/23/2012 3:05 PM (2 Replies)

Rating (1)

Thanks 3

3 Entries

4/23/2012 3:05 PM	Rate (0)
Khaled_Ezzat Silver Member Joined: 9/7/2007 Last visit: 10/9/2024 Posts: 550 Rating: (62)	Dear All, How Can I connect a word in a Data Block to a CFC block?
	Best Regards
Suggestion To thank Quote Answer

4/23/2012 4:41 PM	Rate (1)
TerminalBuzz Silver Member Joined: 11/4/2011 Last visit: 8/25/2024 Posts: 253 Rating: (53)	First check if data type of CFC input (or output) variable is Word or ANY. Then call "Interconnection to Address..." function and begin typing DB Word address, you will see that CFC is helping you and automatically find the variable. Thus you would be shure that you are doing it right. Well, that's all. Cheers!

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Khaled_Ezzat

4/25/2012 12:13 PM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi well if you have to connect the word or the value in the DB to CFC then you will have to give the symbolic name to the DB. Take care that the DB number is well between the user range. you can find it out by following steps. open any CFC and go to options ->customize --> compile and download settings --> in that the data range for the DB has to specified, i think default will be between 1 to 60 Have fun...
	Jazz
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Khaled_Ezzat Md Gouse

|

Share this page:

Share this page on...

Follow us on