Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connect backup archive data in WinCC

Created by: Import-User-1 at: 9/22/2005 12:20 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

9/22/2005 12:20 PM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Hello. In Tag Logging you can activate Backup of an archive. This is OK. But then you would like to connect this backup archive with WinCC Online Trend Control. In Manual of WinCC is written: "To connect an archive file, click the RIGHT MOUSE BUTTON on "Archive Configuration" and select "Link Archive" from the pop-up menu" If I click with right mouse button, I don't get any pop-up menu. So my question is, is this because I don't have Connectivity Pack or the manual is not correct. (In manual there is nothing written about Connectivity Pack, that it should be installed to work this). Help me, please.
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

9/22/2005 12:20 PM	Rate (0)
Import-User-2 Silver Member Joined: 8/10/2005 Last visit: 4/9/2024 Posts: 1486 Rating: (32)	Hello You connect archives in the Tag Logging Editor. If you right-click on the "Archive Configuration", select Tag Logging Fast" or Tag Logging Slow" and you then get the "Link Archive" option. You do not do this from the trend control. In WinCC V6 SP3 you can programmatically link archives using VBS scripts. I have not done this but it is mentioned in the release notes. I hope this helps, Salma

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users KalaDGT

6/18/2009 4:54 PM	Rate (0)
Insausti Posts: 150 Rating: (2)	I'm unsing WinCC v7+SP1, i try to connect a backup data by using the connect backup button available on the WinCC Alarm Control Window. When i press the button it pop-up a window with some backups to choose but when i double-click on any of then it always shows me the same message: <backupname> could not be connected to the system. Any idea about this behaviour???
Insausti Posts: 150 Rating: (2)
Suggestion To thank Quote Answer

6/18/2009 10:40 PM	Rate (0)
CBo Gold Member Joined: 4/5/2006 Last visit: 1/20/2025 Posts: 917 Rating: (63)	Hi Insausti, Import-User-2gave to you procedure to link a backedup archive, there a re a step by step procedure described in"WinCC Information System" -> search for "commonarchive". Regards

Suggestion To thank Quote Answer

6/19/2009 9:30 AM	Rate (0)
Insausti Posts: 150 Rating: (2)	Hi CBo, I knew to do it by means of Llink archive on the Tag Logging editor, what i'm talking about is to link to a backup archive on an Alarm or Trend Control Window during Runtime, using the connect backup button as i described in my previous thread (see above) Regards
Insausti Posts: 150 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on