Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

connect PC-Tp177-CPU313C with MPI

Created by: thuanvuduy at: 10/2/2009 5:08 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

10/2/2009 5:08 AM	Rate (0)
thuanvuduy Posts: 5 Rating: (0)	Hi Thread, I don't know how to connect PC, TP177 and CPU 313C in MPI network. Can you tell me hardware and how to connect them. I have PC with WinCC Flex 07, HMI TP 177A and PLC CPU313C. PC------MPI(RS485)--------TP177A--------MPI(RS485)-----------PLC Thanks. Thuan
thuanvuduy Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

10/2/2009 7:33 AM	Rate (0)
Titas Posts: 94 Rating: (15)	Hello, You can use CP5611 card in the PC. Use any profibus cable (e.g Pink Color) take a loop from PC to Tp177 and from Tp177 to CPU 313c. Everywhere you mentioned MPI protocol. It will work. TITAS
Titas Posts: 94 Rating: (15)
Suggestion To thank Quote Answer

10/2/2009 3:14 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, besides the mentioned points I would like to add that the MPI network may not exceed the length of 50 m per segment. If you want to reach higher distances the use of Repeater is essential. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

10/2/2009 5:39 PM	Rate (0)
thuanvuduy Posts: 5 Rating: (0)	Hi ! thanks for help me, so can you draw network for me? When connect PC to Tp177, so how can connect Tp177 to PLC? we connect it by connector? Thanks again. Thuan
thuanvuduy Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

10/5/2009 9:53 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, actually I have no clue what you want to see, but this is what I have in my mind. Best regards J_Bell Attachment MPI Setup.jpg (161 Downloads)
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

10/5/2009 10:34 AM	Rate (0)
thuanvuduy Posts: 5 Rating: (0)	hi J_Bell and everyone ! Thanks for help me Thuan
thuanvuduy Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on