Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

connect PLC S7 1200 with a PC does not work

Created by: tungtttc at: 5/17/2016 4:34 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

5/17/2016 4:34 PM	Rate (0)
tungtttc Posts: 1 Rating: (0)	I connect PLC S7 1200 with a PC but it does not work Can you help me ------------------------------------------------------------------------------------------ Split from S7-1200 TCP communication - Sample program.
tungtttc Posts: 1 Rating: (0)	Last edited by: Min_Moderator at: 5/18/2016 2:52:33 PM New subject after splitting
Suggestion To thank Quote Answer

5/18/2016 3:17 PM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 1/17/2025 Posts: 22497 Rating: (3044)	Hi, with this informations is not possible to help you! Which TIA SW Version you use? Which PLC 1200 you use and which FW Version? How you connect the PLC to the PC ? What exactly does "not work" mean? Regards Christoph
	Last edited by: ChristophD at: 5/18/2016 3:18:07 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Gordon Shumway

5/18/2016 5:45 PM	Rate (0)
grrrrrroooo Platinum Member Joined: 3/16/2015 Last visit: 10/10/2021 Posts: 1250 Rating: (173)	tungtttc I connect PLC S7 1200 with a PC but it does not work Can you help me ------------------------------------------------------------------------------------------ Split from S7-1200 TCP communication - Sample program. Try to connect it the other way around and see if that works.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on