Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connect Sinamics V20 with Raspberry pi 3

Created by: Usman_emden_hs at: 3/22/2020 6:38 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

3/22/2020 6:38 PM	Rate (0)
Usman_emden_hs Member Joined: 9/22/2019 Last visit: 12/14/2022 Posts: 8 Rating: (0)	Hi, I wanna connect Sinamics V20 with raspberry pi 3 for getting data of the motor without PLC. It`s my university project. While I am using GPIO`s to RS485 converter.

Suggestion To thank Quote Answer

3/23/2020 8:41 AM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 12/9/2024 Posts: 4816 Rating: (735)	The USS protocol.
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

3/23/2020 10:02 AM	Rate (0)
Usman_emden_hs Member Joined: 9/22/2019 Last visit: 12/14/2022 Posts: 8 Rating: (0)	Well, I want to use Modbus Rtu.

Suggestion To thank Quote Answer

3/23/2020 10:21 AM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 12/9/2024 Posts: 4816 Rating: (735)	That's great. So, what is your question actually?
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

3/23/2020 12:31 PM	Rate (0)
Usman_emden_hs Member Joined: 9/22/2019 Last visit: 12/14/2022 Posts: 8 Rating: (0)	As I mentioned above: I wanna connect Sinamics V20 with raspberry pi 3 for getting data of the motor without PLC. It`s my university project. While I am using GPIO`s to RS485 converter and Modbus Rtu. So, Could you please suggest me how I can do it.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on