Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connect Sinumerik 840Di to PC

Created by: Karim31 at: 5/8/2012 1:53 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

5/8/2012 1:53 PM	Rate (0)
Karim31 Posts: 2 Rating: (0)	Hi, i have a laptop with Simatic S7 V5.5 and a TS adapter. How to connect to a SINUMERIK 840Di 6FC5258-2AX10-2AF0 (NCK 6FC5222-0AA00-1AA0 - Panel 6FC5203-0AF00-0AA0). I need to read PLC program. Thanks.
Karim31 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

5/8/2012 1:59 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Karim31 Hi, i have a laptop with Simatic S7 V5.5 and a TS adapter. How to connect to a SINUMERIK 840Di 6FC5258-2AX10-2AF0 (NCK 6FC5222-0AA00-1AA0 - Panel 6FC5203-0AF00-0AA0). I need to read PLC program. Thanks. Hello;.. You need to have CP5611 / CP5711 for readingPLC programinfromations.. Check it... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

5/8/2012 2:09 PM	Rate (0)
Karim31 Posts: 2 Rating: (0)	Think you for the reply Were connect the CP5611. There is 2 MPI. One on the NC card and the other on the mother board.
Karim31 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

5/8/2012 2:16 PM	Rate (1)
Ekalavya Posts: 2964 Rating: (484)	Karim31 Think you for the reply Were connect the CP5611. There is 2 MPI. One on the NC card and the other on the mother board. Hello.... Where exactly are you looking. You need to look in to you MCI2 board there you have DP1 and DP2 .. the port which is free in MCI2 board connect it. Settings you need to keep to Profibus 12Mbps.... Check it... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on