Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connecting a Tp170 or TP270 to 4 6RA70 DC Drives

Created by: The Keeper at: 4/6/2006 9:00 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/6/2006 9:00 PM	Rate (0)
The Keeper Advanced Member Joined: 4/6/2006 Last visit: 12/16/2024 Posts: 24 Rating: (2)	What has to be done to connect a TP170 or TP270 to 4 master drive via profibus.Is WinCC Flex the only software package needed? If not what other package is needed? Adding a PLC to this isn't an option

Suggestion To thank Quote Answer

4/10/2006 8:34 AM	Rate (0)
The Brain Gold Member Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating: (121)	Hi, i did not really know what you want to do, but notes the panels are only use for visualisation of prozessing data. The "connection" did not have to do anythink with the DC drives! The best are, you contact your local Siemens partner.

Suggestion To thank Quote Answer

4/20/2006 7:48 PM	Rate (0)
The Keeper Advanced Member Joined: 4/6/2006 Last visit: 12/16/2024 Posts: 24 Rating: (2)	What I want to do is hook up one TP to 4-6RA70 drives and 2-6RA24 drives. I only want to monitor the drives except for starting & stopping them. Is this possible. I have heard you can only connect one TP to one drive, but from what I have read it sounds like you can connect more than that using the 422 protocal. Thanks

Suggestion To thank Quote Answer

4/24/2006 9:21 AM	Rate (0)
Nemo Posts: 3149 Rating: (172)	Hi, perhaps this FAQ can give you some hints: http://support.automation.siemens.com/WW/view/en/11996716 Or you contact the Simovert Customer Support who can you give more information - hopefully...(I normallyuse a S7-CPU with my Panel) nemo
Nemo Posts: 3149 Rating: (172)	Last edited by: Nemo at: 4/24/2006 1:40 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on