Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connecting Mitshubishi PLCs to Wincc TIA

Created by: pratik7332 at: 3/8/2013 9:59 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/8/2013 9:59 AM	Rate (0)
pratik7332 Bronze Member Joined: 11/26/2009 Last visit: 1/17/2025 Posts: 223 Rating: (1)	Hi, I am Trying to connect 4 No. of Mitshubishi PLCs though Ethernet switch In WIncc TIA i don know which settigns i have to do. Basically there are 4 Fx3U type of CPU connceted to one switch,They are following MC TCP/IP protocol and i can ping each one of them but cant see them in "Accesible device " in Wincc flexible TIA.

Suggestion To thank

3/9/2013 12:40 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/22/2025 Posts: 4114 Rating: (195)	closed cause question posted twice. The second thread with the subjectConnecting Wincc TIA to Mitsubishi PLCis published within the same conference. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on