Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

connecting pm-e

Created by: vipz at: 12/29/2012 2:29 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/29/2012 2:29 PM	Rate (0)
vipz Gold Member Joined: 9/2/2012 Last visit: 4/29/2023 Posts: 711 Rating: (30)	Dear experts, can anybody explain the recomented way on connecting PM-E module on IM151 remote station? Ie how many PM-E module need to connect/ signal module?? regards Vipz
	With Best Regards VIPZ
Suggestion To thank Quote Answer

12/30/2012 6:40 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	Basically the rule is The number of modules that can be connected depends on the total current of all modules in a voltage group. This total must not exceed the maximum current carrying capacity. But you can try bellow mentioned tool. I think there is covered that rule. Please refer to following tool.SIMAITC Selection Tool Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on